TN032 – Z4550 Radio Configuration and Activation

Z4550 Radio Configuration and Activation

Last Issue Date: August 8, 2015

Document Status: Current

See Also: N/A


Previous models of Ctek’s SkyRouter were designed and configured to operate on a single carrier’s network, or in the case of UMTS/HSPA models on a prescribed set of frequencies. Unlike these earlier models, the Ctek 4550 contains a multi-carrier, software defined radio that must be configured for proper operation on a specific network. Configuring the 4550 for network operation consists of three discrete evolutions, loading a firmware image, configuring and saving the installed radio firmware image, and activating the SkyRouter on a specific network.